This is a standard length 28” Contact Wand.
This wand will be gripped before shipping.

This pre-made wand is reflective, meaning that it will appear to “light up” when you film it using a flash. It is also UV Reactive, meaning that it will glow under a blacklight.

Special 3D printed bone end caps!!

• This wand rests @ 8.3oz with the bone caps installed.

• You will also receive my regular silicone contact ball endcaps to replace the bones for future use. You choose the weight for this setup.

• The wands themselves are 100% balanced and the same feel as my normal contact wands.

Please read below for more details on what can be customized. <<< You will select all of your options when you “add to cart”.

• Weight = You can choose any weight between 8oz and 11 oz (this is really heavy!!!). A good standard wand to learn and grow with would be between 8.5-9oz.

EXAMPLE: 9oz, 9.5oz, 9.8oz, 10oz, 10.2oz...11oz

• String setup/tether: You choose between a finger loop/swivel, long string (which will NOT come with a swivel or finger loop, or a Lanternsmith X Derpgear Pomgrip setup (recommended for learning tosses).

Other wand specs:

• Width = Same size as Derpgear daywands at 5/8th inches.

• Length = 28 inches.

• Thick technora braided string.

Each wand is personally tested for balance.

If you need anymore help deciding/have questions, please reach out to me here.