DerpGear daywands are perfect for everyone from total beginner to experienced flowmie.
If you’re feeling lost, read Leviwand FAQs here.
Check out Instagram for video details of this wand.

This pre-made wand is reflective, meaning that it will appear to “light up” when you film it using a flash. Scroll down to see an example of reflective tapes. The reflective pattern is “coin-flip” style, meaning then when it’s moving it will appear to strobe back and forth between the two tape colors.

Specs:

• THIS IS A NOVELTY WAND:
  Meaning, the hands may make it feel like it’s not as perfectly balanced as my normal daywands depending on your spinning conditions due to them adding resistance/dragging in the wind.
  Usually a little turn/adjustment of the hands is enough to fix it.
  The wands themselves are 100% balanced and the same as my normal daywands.
  YOU WILL ALSO RECEIVE my regular daywand endcaps to replace the hands with for future use.

• String/tether setup: Choose between short string finger loop/swivel or long string (which will NOT come with a swivel or finger loop).

  • I recommend a short string setup for beginners. (You can read FAQS here if you need help)

  • If you are looking for a Pomgrip, you can grab one here.

• All daywands are approx. 27 inches long & 5oz. They’re perfect for everyone from beginners to experienced flowsters. They’re a bit heavier than most lightweight daywands and are my personal favorite wands for long stringing.

• Width = All Derpgear wands are 5/8th inches.

Each wand is personally tested for balance.
If you need anymore help deciding/have questions, please reach out to me here.